3D Printing at The Advanced Output Center

The AOC’s 3D printers are open to all currently enrolled students, faculty and staff at SAIC. While there is no authorization required, users must have a good understanding of 3D solid modeling in order to prepare files correctly. 3D printing is a technician-run service. [more]

 

Remember, when using the online order forms you must be logged into your SAIC Google account.

 

Get Certified For Ultimaker Self Service Printing

Book Slice Review to use self-service Ultimaker printers.
Notice:
To use self-service 3D printing at the AOC, you must make an appointment to have your Cura slice file reviewed. You must already be certified and your files must already be sliced before making this appointment.


Job Submission through Papercut
Note:
You must be on campus or use VPN to access the Job Submission page. You will also need to complete this tutorial agreement before you can pay for orders. Make sure each separate physical part is a separate STL file before submission.


Guides

Model Preparation in Rhino
Netfabb Repair
Autodesk Meshmixer
Pre-processing your files for F370
Pre-processing your files for Formlabs
Geomagic Information

 

 


 

FORMLABSORDER FORM VPN Required
LocationAOC, 1232 Sullivan.
AccessTechnician-run;
Pre-processed files are submitted online through the AOC website with a completed order form;
Open to all SAIC community (students, faculty, staff, alumni).
File TypesSolid STL files with each physical part exported as a separate file.
Max Build Size5.7" x 5.7" x 6.9"
Build Resolutions0.025mm, 0.05mm, 0.1mm *varies by material
Design SpecsFor more detailed info on designing for the Formlabs, visit our design specs page here.
MaterialsAcrylic-like plastic in white, gray, black, clear, and custom colors. Dark gray flexible. Teal ABS-like plastic. White rigid. Blue Draft. Translucent durable and elastic. Gray-pro.
Build OptionsSolid only. To save money, shell parts in Meshmixer.
Pricing$0.40/milliliter
Job TurnaroundVaries greatly depending on size and shape of model, color choice and queue length. Check with a lab technician for an estimate.

 

 

F370ORDER FORM VPN Required
LocationAOC, 1232 Sullivan.
AccessTechnician-run;
Pre-processed files are submitted online through the AOC website with a completed order form;
Open to all SAIC community (students, faculty, staff, alumni).
File TypesSolid STL files with each physical part exported as a separate file. Files should be pre-processed in GrabCAD prior to submission.
Max Build Size14" x 10" x 14"
Build Resolutions0.127mm, 0.178mm, 0.254mm, 0.330mm
Design SpecsFor more detailed info on designing for the F370, visit our design specs page here.
MaterialsABS plastic in white, ivory, grey, black, blue, red, orange, yellow, or green
ASA plastic in white or black
PC-ABS in black
Sandable & machinable, with good impact resistance
Build OptionsSolid interior (stronger, more expensive and longer build time)

High Density sparse interior (less strength than solid, slightly cheaper)

Low Density strong interior (less strength than high density but double thick walls compared to low density sparse. Save money but keep some strength)

Low Density sparse interior (less strength than high density, cheaper, quicker build time)
PricingModeling Material: $4.50/in³
Support Material: $4.50/in³
Build Base: $0.40/2″x2″ square
(Prices can be estimated in GrabCAD)
ArtiCard only, payable on job pickup.
Job TurnaroundVaries greatly depending on size and shape of model, color choice and queue length. Check with a lab technician for an estimate.

 

 

OBJET 30 PROORDER FORM VPN Required
LocationAOC, 1232 Sullivan.
AccessTechnician-run;
Pre-processed files are submitted online through the AOC website with a completed order form;
Open to all SAIC community (students, faculty, staff, alumni).
File TypesSolid STL files with each physical part exported as a separate file.
Max Build Size11.57" x 7.55" x 5.85"
Build Resolutions0.016mm
MaterialsAcrylic-like plastic in clear.
Sandable & machinable, poor impact resistance
Heat deflection temperature of 40°C (104°F)
Build OptionsSolid interior (stronger and more expensive)
Shelled/support interior (less strength and cheaper)
PricingModeling Material: $0.30/gram
Support Material: $0.15/gram
Job TurnaroundVaries greatly depending on size and shape of model, and queue length. Check with a lab technician for an estimate.

 

Ultimaker 3 and Ultimaker S5ORDER FORM VPN Required
LocationAOC, 1232 Sullivan.
AccessBoth Self-Service and Technician-run available;
Pre-processed files are submitted online through the AOC website with a completed order form;
Open to all SAIC community (students, faculty, staff, alumni).
File TypesSolid STL files with each physical part exported as a separate file.
Max Build SizeUltimaker S3: 9" x 7.4" x 7.9"
Ultimaker S5: 13" x 9.4" x 11.8"
Build Resolutions0.2mm
0.15mm
0.1mm
MaterialsPLA Plastic in White or Black
Build OptionsGradual (auto thickens in small areas but uses sparse pattern inside for a lower cost)
10% infill
20% infill
PricingModeling Material: $0.05 per gram
Job TurnaroundVaries greatly depending on size and shape of model, color choice and queue length. Check with a lab technician for an estimate.

 

 

 

 

 

Questions? Email advancedoutput@saic.edu